SSF - Mortise Lock with 20 mm faceplate, round, DIN right, Plastic latch and deadbolt

Interior Mortise Lock BB 20/55/72/8 mm DIN right silver rounded Class 1
 

Product Description:

• SSF guarantees that mortise locks for interior doors comply with the requirements of DIN 18251-1.
• Class 1: Locks for light interior doors
• The lock classifications simultaneously include an ascending quality performance.
• The classification keys according to the European standard EN 12 209 are assigned to the respective lock types on the individual catalog pages.
• Interior doors are subject to long-term and permanent stress.
• The lock's share of the total cost of a door/frame is relatively subordinate.
• SSF recommends high quality.
• Information on backset dimensions, locking types, variants, material finishes, and options corresponds to the descriptions of the individual lock series.
• Lock cases are fully enclosed and corrosion-protected by galvanization.
• To avoid the risk of breakage in the lock pocket area during lock and hardware installation, SSF locks are equipped with a legally protected lock pocket support.
• This also serves as chip protection.

Technical Product Data:

Click on the drawing to enlarge!

• BB version
• According to DIN 18251-1 Class 1
• Fully enclosed lock case
• 1-turn
• Rounded
• Faceplate aluminum finish, silver
• Faceplate width 20 mm
• Faceplate length 235 mm
• Backset 55 mm
• Distance 72 mm
• Square spindle 8 mm
• Plastic latch and deadbolt
• Without strike plate
• 1 key

DIN right: Stand in front of the door, which opens towards you. If the door hinges are on the right, it is referred to as DIN right.

DIN left: Stand in front of the door, which opens towards you. If the door hinges are on the left, it is referred to as DIN left.